2 Ton 13 SEER 80% AFUE 60,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow

 
Categoría: Productos & Servicios / Heat Pump & Furnace Systems
Estado: Nuevo
Disponibles: 111
El comercio no realiza envíos

USD 3,412.00
  • DESCRIPTION
    The Goodman GMS8/GDS8 multi-position gas furnaces feature a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these gas heaters can be installed in a utility room, closet, alcove, basement or attic. (Not intended for use in mobile homes.)

    Furnace Features

    Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit.
    Corrosion-resistant, aluminized-steel tubular furnace heat exchanger
    Furnace is designed for multi-position installation - Goodman GMS8: upflow, horizontal right or left; Goodman GDS8: dedicated downflow
    Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life
    Aluminized steel inshot gas furnace burners
    Energy-saving PSC, multi-speed, direct drive blower motor
    Quiet, corrosion-resistant induced draft furnace blower assembly
    Integrated Goodman furnace control with diagnostics
    Low voltage terminal blocks
    Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
    40VA transformer for heating and air conditioning control service
    Combination redundant gas valve and regulator
    A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
    Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
    Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
    Attractive architectural gray paint finish
    Heater's foil-face insulation lines the heat exchanger compartment
    Coil and furnace fit flush for easy installation
    Convenient left or right connection for gas and electric service
    Bottom or side air inlet (Goodman GMS8)
    Removable, solid-bottom block off
    All “X” models comply with California NOx emissions standards
    The Goodman GSX130241 Air Conditioner Condenser uses the chlorine-free refrigerant R-410A and features operating sound levels that are among the lowest in the heating and cooling industry. With its 13 SEER rating, The Goodman GSX130241 Air Conditioner Condenser will help reduce energy consumption throughout the life of the system. Goodman has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.

    Please note that this product is regulated by DOE Efficiency Standards.

    R-410A chlorine-free refrigerant
    Factory-installed filter dryer
    Copper tube/enhanced aluminum fin coil
    Service valves with sweat connections and easy-access gauge ports
    Contactor with lug connection
    Ground lug connection
    AHRI Certified; ETL Listed
    Goodman brand louvered sound control top design
    Steel louver coil guard
    Heavy-gauge galvanized-steel cabinet
    Baked-on powder-paint finish with 500-hour salt-spray approval
    Top and side maintenance access
    Single-panel access to controls with space provided for field-installed accessories
    When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds
    60,000 BTU 80% AFUE Upflow Single Stage Goodman Gas Furnace
    The Goodman GMS80603AN gas furnace can be installed in either an upflow or horizontal configuration and features an aluminized steel tubular heat exchanger and high efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating and cooling applications. With its heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, this gas furnace can be installed in a utility room, closet, alcove, basement or attic. Not intended for use in mobile homes.

    The Goodman GMS80603AN furnace has a 80% AFUE rating which means that for every every $1.00 you spend, 80 cents goes towards heating your home.

    This unit is not intended for purchase or install in California. For California please purchase a Low Nox furnace.



    Furnace Features
    Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit.
    Corrosion-resistant, aluminized-steel tubular furnace heat exchanger
    Furnace is designed for upflow or horizontal installation
    Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life
    Aluminized steel inshot gas furnace burners
    Energy-saving PSC, multi-speed, direct drive blower motor
    Quiet, corrosion-resistant induced draft furnace blower assembly
    Integrated Goodman furnace control with diagnostics
    Low voltage terminal blocks
    Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
    40VA transformer for heating and air conditioning control service
    Combination redundant gas valve and regulator
    A rotating combustion air blower that provides the option of venting the furnace through the top, right-hand side or left-hand side
    Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
    Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
    Attractive architectural gray paint finish
    Heater's foil-face insulation lines the heat exchanger compartment
    Coil and furnace fit flush for easy installation
    Convenient left or right connection for gas and electric service
    Bottom or side air inlet
    Removable, solid-bottom block off
    To comply with efficiency requirements in California this unit will be automatically upgraded to the Low Nox Approved furnace when shipping to California

    2 Ton 13 SEER Goodman Air Conditioner Condenser
    OVERVIEW
    The Goodman GSX130241 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130241 is an inexpensive condenser to cool your home when paired with an AC coil.

    QUICK FACTS
    Ideal size to cover a smaller house
    2 ton, 13 SEER AC-only condenser
    Low sound output
    Fully charged for up to 15' of line set
    Factory-installed filter drier
    2 ton
    The GSX130241 condenser is a 2 ton AC only unit. In an ideal climate situation, the GSX130241 can usually cover a smaller house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own.

    13 SEER
    The Goodman GSX130241 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards.

    Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.

    Warranty
    The GSX130241 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

    Durability and Reliability
    With an enhanced copper tube and aluminum fin coil, the GSX130241 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser's heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home.

    Installation and Maintenance
    The Goodman GSX130241 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.

    Comfort in Mind
    The Goodman brand always has its customer's comfort in mind. The GSX130241 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.

    1.5 to 2 Ton 14" Width Goodman Vertical Evaporator Cased Coil
    OVERVIEW
    With the CAPF1824A6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF1824A6 is designed to be versatile in design and to provide an efficient comfort at a low cost.

    QUICK FACTS
    1.5 to 2 ton evaporator coil
    Installable in the upflow or downflow configurations
    Usable with either a heat pump or an AC-only condenser
    Low air leakage
    Check flowrater expansion device for use in any application
    1.5 to 2 Tons
    The Goodman CAPF1824A6 evaporator coil is rated for a 1.5 to 2 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.
    Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.

    Warranty
    The CAPF1824A6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.

    Installation and Durability
    The Goodman CAPF1824A6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access.
    Please note that this coil will not work as a replacement for any single-piece air handler coils.

    Enhanced Comfort
    The CAPF1824A6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF1824A6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.

    30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
    Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

    50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
    Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.
  • Leer más

Agregar al carrito
 

Detalles

DESCRIPTION The Goodman GMS8/GDS8 multi-position gas furnaces feature a patented aluminized steel tubular heat exchanger and high-efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these gas heaters can be installed in a utility room, closet, alcove, basement or attic. (Not intended for use in mobile homes.) Furnace Features Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit. Corrosion-resistant, aluminized-steel tubular furnace heat exchanger Furnace is designed for multi-position installation - Goodman GMS8: upflow, horizontal right or left; Goodman GDS8: dedicated downflow Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life Aluminized steel inshot gas furnace burners Energy-saving PSC, multi-speed, direct drive blower motor Quiet, corrosion-resistant induced draft furnace blower assembly Integrated Goodman furnace control with diagnostics Low voltage terminal blocks Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air 40VA transformer for heating and air conditioning control service Combination redundant gas valve and regulator A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side Completely assembled, factory run-tested furnace for heating or combination heating/cooling application Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish Attractive architectural gray paint finish Heater's foil-face insulation lines the heat exchanger compartment Coil and furnace fit flush for easy installation Convenient left or right connection for gas and electric service Bottom or side air inlet (Goodman GMS8) Removable, solid-bottom block off All “X” models comply with California NOx emissions standards The Goodman GSX130241 Air Conditioner Condenser uses the chlorine-free refrigerant R-410A and features operating sound levels that are among the lowest in the heating and cooling industry. With its 13 SEER rating, The Goodman GSX130241 Air Conditioner Condenser will help reduce energy consumption throughout the life of the system. Goodman has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market. Please note that this product is regulated by DOE Efficiency Standards. R-410A chlorine-free refrigerant Factory-installed filter dryer Copper tube/enhanced aluminum fin coil Service valves with sweat connections and easy-access gauge ports Contactor with lug connection Ground lug connection AHRI Certified; ETL Listed Goodman brand louvered sound control top design Steel louver coil guard Heavy-gauge galvanized-steel cabinet Baked-on powder-paint finish with 500-hour salt-spray approval Top and side maintenance access Single-panel access to controls with space provided for field-installed accessories When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds 60,000 BTU 80% AFUE Upflow Single Stage Goodman Gas Furnace The Goodman GMS80603AN gas furnace can be installed in either an upflow or horizontal configuration and features an aluminized steel tubular heat exchanger and high efficiency hot surface ignition system. These furnaces are run-tested for heating or combination heating and cooling applications. With its heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, this gas furnace can be installed in a utility room, closet, alcove, basement or attic. Not intended for use in mobile homes. The Goodman GMS80603AN furnace has a 80% AFUE rating which means that for every every $1.00 you spend, 80 cents goes towards heating your home. This unit is not intended for purchase or install in California. For California please purchase a Low Nox furnace. Furnace Features Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit. Corrosion-resistant, aluminized-steel tubular furnace heat exchanger Furnace is designed for upflow or horizontal installation Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life Aluminized steel inshot gas furnace burners Energy-saving PSC, multi-speed, direct drive blower motor Quiet, corrosion-resistant induced draft furnace blower assembly Integrated Goodman furnace control with diagnostics Low voltage terminal blocks Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air 40VA transformer for heating and air conditioning control service Combination redundant gas valve and regulator A rotating combustion air blower that provides the option of venting the furnace through the top, right-hand side or left-hand side Completely assembled, factory run-tested furnace for heating or combination heating/cooling application Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish Attractive architectural gray paint finish Heater's foil-face insulation lines the heat exchanger compartment Coil and furnace fit flush for easy installation Convenient left or right connection for gas and electric service Bottom or side air inlet Removable, solid-bottom block off To comply with efficiency requirements in California this unit will be automatically upgraded to the Low Nox Approved furnace when shipping to California 2 Ton 13 SEER Goodman Air Conditioner Condenser OVERVIEW The Goodman GSX130241 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130241 is an inexpensive condenser to cool your home when paired with an AC coil. QUICK FACTS Ideal size to cover a smaller house 2 ton, 13 SEER AC-only condenser Low sound output Fully charged for up to 15' of line set Factory-installed filter drier 2 ton The GSX130241 condenser is a 2 ton AC only unit. In an ideal climate situation, the GSX130241 can usually cover a smaller house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own. 13 SEER The Goodman GSX130241 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards. Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia. Warranty The GSX130241 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld. Durability and Reliability With an enhanced copper tube and aluminum fin coil, the GSX130241 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser's heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home. Installation and Maintenance The Goodman GSX130241 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary. Comfort in Mind The Goodman brand always has its customer's comfort in mind. The GSX130241 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry. 1.5 to 2 Ton 14" Width Goodman Vertical Evaporator Cased Coil OVERVIEW With the CAPF1824A6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF1824A6 is designed to be versatile in design and to provide an efficient comfort at a low cost. QUICK FACTS 1.5 to 2 ton evaporator coil Installable in the upflow or downflow configurations Usable with either a heat pump or an AC-only condenser Low air leakage Check flowrater expansion device for use in any application 1.5 to 2 Tons The Goodman CAPF1824A6 evaporator coil is rated for a 1.5 to 2 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system. Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately. Warranty The CAPF1824A6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer. Installation and Durability The Goodman CAPF1824A6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils. Enhanced Comfort The CAPF1824A6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF1824A6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price. 30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications. 50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.

4.65

Puntuación media